Die Hasselblad X2D II 100C und das XCD 2,8-4/35-100E wiegen zusammen rund 1,7 kg.
Bild: HasselbladRund drei Jahre nach der X2D 100C hat Hasselblad die stark überarbeitete Nachfolgerin X2D II 100C vorgestellt. Bei anderen Herstellern wie Fujifilm selbstverständlich, aber neu bei Hasselblad ist der kontinuierliche Autofokus (AF-C) im Serienmodus, der mit drei Bildern pro Sekunde arbeitet.
Das AF-System basiert auf Deep-Learning-Algorithmen und soll sich bewegende Motive (Menschen, Hunde, Katzen und Fahrzeuge) präzise erkennen und verfolgen. Die Abdeckung des Phasenerkennungs-Autofokus (PDAF) hat der Hersteller von 294 auf 425 Zonen erweitert. Unterstützt wird der Autofokus von einen LiDAR-System und einem AF-Illuminator.
Der Zentralverschluss ermöglicht mit XCD-Objektiven Belichtungszeiten zwischen 1/4000 s und 68 Minuten. Ein elektronischer Verschluss schafft auch 1/6000 s.
Auf der Oberseite der Hasselblad X2D II 100C informiert ein Status-Display über die wichtigsten Einstellungen.
Bild: HasselbladHDR-Workflow bei Hasseblad
Laut Hersteller ist die X2D II 100C „die erste Mittelformatkamera, die echtes End-to-End-HDR unterstützt.“ Hasselblad spricht von „HNCS HDR“ (Hasselblad Natural Color Solution High Dynamic Range), also einer Kombination aus natürlichen Farben und hohem Dynamikumfang mit maximaler Zeichnung in den Spitzlichtern. HDR-Bilder werden in der Kamera als HDR HEIF oder Ultra HDR JPEG verarbeitet und können auf dem neuen 3,6-Zoll-OLED-Touchscreen mit einer Spitzenhelligkeit von bis zu 1400 Nits – 75 Prozent heller als bei der X2D 100C – betrachtet werden. Mit der Software Phocus Mobile 2 können Fotografen HDR-Bilder bearbeiten und die HNCS-HDR-Verarbeitung auf Raw-Dateien anwenden.
Der große 3,6-Zoll-Touch-Monitor der X2D II 100C lässt sich nach oben und unten kippen.
Bild: HasselbladBSI-Sensor mit 100 Megapixeln
Wie ihre Vorgängerin ist die X2D II 100C mit einem BSI-CMOS-Sensor ausgestattet, der 43,8 x 32,9 mm groß ist und 100 Megapixel auflöst. Die maximale Farbtiefe bleibt bei 16 Bit. Eine neue native ISO-Einstellung von 50 (statt 64) und ein erhöhter Dynamikumfang von 15,3 Blendenstufen (statt 15) sollen eine präzisere Steuerung von den tiefsten Schatten bis zu den hellsten Lichtern ermöglichen.
Verbessert wurde auch die Bildstabilisierung: Das 5-Achsen-Stabilisierungssystem in der Kamera soll gemäß CIPA-Standard von 2024 10 Stufen in der Bildmitte und 8 am Bildrand kompensieren (gemessen mit dem XCD 3,5/120 Macro). Unseres Wissens ist das ein Stabilisierungsrekord.
Weitere Funktionen der Hasselblad X2D II 100C sind Fokus-Bracketing, eine USB-C-Schnittstelle (3.1 Gen2) und eine Akkulaufzeit von 327 Aufnahmen (bis zu 466 wenn HDR deaktivierte ist). Als eine von wenigen aktuellen Kameras, nimmt die X2D II 100C übrigens kein Video auf, entsprechend fehlt auch eine HDMI- oder Audio-Schnittstelle.
Zu den Bedienelementen auf der Rückseite gehört auch ein Joystick.
Bild: Hasselblad1 Terabyte interner Speicher
Wie ihre Vorgängerin ist die X2D II 100C mit einer internen 1-TB-SSD und einem Laufwerk für CFexpress-Speicherkarten vom Typ B ausgestattet. Das Gehäuse wiegt mit Batterie 840 Gramm und damit 7,5 Prozent weniger als die X2D 100C. Der Griff wurde neu gestaltet und verfügt nun über eine strukturierte Oberfläche.
Der 3,6-Zoll-OLED-Bildschirm mit Touch-Bedienung löst 2,36 Millionen Punkte auf und lässt sich um 90 Grad nach oben und um etwa 43 Grad nach unten neigen und herausziehen. Der große Sucher (1x-Vergrößerung) bringt es auf 5,76 Millionen Punkten. Für die Auswahl des AF-Messfeldes und die Menünavigation ist ein neuer 5D-Joystick zuständig.
Hasselblad XCD 2,8-4/35–100E
Zusammen mit der X2D II 100C hat Hasselblad das neue Standardzoom XCD 2,8-4/35–100E vorgestellt, das im Vergleich zum Kleinbild 28–76 mm abdeckt. Das „E“ steht für „Exclusive“ und verspricht eine erstklassige optische Leistung, die die gleiche Bildqualität von Rand zu Rand wie die XCD-Festbrennweitenobjektive von Hasselblad bieten soll. Das optisches Design umfasst 16 Elemente in 13 Gruppen, darunter drei asphärische und fünf ED-Elemente, die den Anforderungen eines 100-Megapixel-Sensors gerecht werden sollen.
Der Zentralverschluss des XCD 2,8-4/25-100E ermöglicht Verschluss- und Blitzsynchronzeiten bis zu 1/4000 s. Die Kamera beherrscht per E-Verschluss auch 1/6000 s.
Bild: HasselbladDas XCD 2,8-4/35–100E wird vom schnellsten Schrittmotor der XCD-Objektivreihe angetrieben und passt damit zum AF-C-System der X2D II 100C. Der integrierte Zentralverschluss bietet eine vollständige Blitzsynchronisation von 1/4000 Sekunde bis 68 Minuten, sodass Fotografen den Aufhellblitz bei hellem Licht ausgleichen oder ohne Kompromisse mit weit geöffneter Blende fotografieren können. Mit einer Länge von 138 mm und einem Gewicht von 894 Gramm ist das XCD 2,8-4/35–100E für ein Mittelformatobjektiv relativ kompakt und leicht. Es verfügt über die Steuerringe der XCD V-Serie, die eine schnelle Einstellung von Verschlusszeit, Blende, ISO, Belichtungskorrektur und Motivwechsel ermöglichen.
Als Zubehör für Kamera und Objektiv bietet Hasselblad optische Filter und einen neuen Rucksack an.
Preise für Kamera, Objektiv und Zubehör von Hasselblad
- Hasselblad X2D II 100C: ca. 7200 Euro.
- XCD 2,8-4/35-100E: ca. 4800 Euro.
- Vandra-Rucksack: ca. 430 Euro.
- UV-Filter 86 mm: ca. 260 Euro.
- ND8 86-mm-Filter: ca. 290 Euro.
- CPL 86-mm-Filter: ca. 470 Euro.
Technische Daten zu Hasselblad X2D II 100C
| General | |
| Camera Type | Medium format digital camera with autofocus, auto-exposure |
| Construction | Machined aluminium. Tripod socket 1/4″ |
| Sensor Type | Back-side illuminated (BSI) CMOS, 100 megapixels (11656 × 8742 pixels, pixel size 3.76μm) |
| Sensor Dimensions | 43.8 × 32.9mm |
| IR Filter | Mounted in front of sensor |
| Operating Temperature [1] | -10° to 45° C (14° to 113° F) |
| Operating Humidity | No more than 85% without condensation |
| Supported Lenses | Hasselblad XCD Lenses; all HC/HCD, XPan, and V System Lenses using the corresponding lens adaptor |
| Lens Equivalent focal Length | Multiplier for full-frame lens equivalent focal length is 0.78 |
| Dimensions | 148.5 × 106 × 75mm |
| Weight | 840g (camera body with the battery), 730g (camera body only) |
| Image and Storage | |
| File Format | Hasselblad 3FR RAW, full size J PG and HEIF |
| Image Size | 3FR RAW: 206MB on average JPG: 32MB on average, HDR JPG: 40MB on average HEIF: 20MB on average, HDR HEIF: 28MB on average |
| Colour Definition | 16-bit, dynamic range up to 15.3 stops |
| Colour Depth | Hasselblad 3FR RAW can be set to 14-bit or 16-bit HEIF: 10-bit |
| Colour Management | Hasselblad Natural Colour Solution with High Dynamic Range (HNCS HDR) [2] |
| Capture Rate | Up to 3 fps in Continuous drive mode (measured in AF-C autofocus continuous mode) |
| Storage Options | Built-in 1TB SSD. Extra CFexpress Type B card with a max storage capacity of 512GB supported |
| Recommended Memory Cards | Sony CEB-G series CFexpress Type B memory cards (128GB) SanDisk Extreme Pro CFexpress Type B memory cards (128GB, 256GB, 512GB) Lexar Professional CFexpress Type B Card DIAMOND Series (128GB, 256GB) |
| Interface | |
| Host Connection Type | USB 3.1 Gen2 Type-C connector (theoretical bandwidth 10Gbit/s) |
| Expansion Connection | Hot Shoe Contacts |
| Extra Ports | Shutter control port, supporting the Hasselblad Release Cord X |
| Shutter | |
| Shutter Modes | Mechanical shutter, electronic shutter |
| Shutter Type | Electronically controlled leaf shutter |
| Shutter Speed | 68 min to 1/4000s with XCD Lenses. [3] Up to 1/800s or 1/2000s with HC/HCD Lenses. Electronic shutter 68 min to 1/6000s |
| Exposure Control | |
| ISO Speed Range | ISO Auto, 50, 100, 200, 400, 800, 1600, 3200, 6400, 12800, 25600 |
| Exposure Metering | Smart metering [4], spot, centre weighted, and centre spot |
| Exposure Modes | P/A/S/M/AUTO |
| Metering Range | Minimum -3 EV |
| Exposure Compensation | Manually adjusted between - 5 to 5 EV with a step of 1, 1/2, or 1/3 |
| Capture and Focusing | |
| Drive Modes | Single Drive, Continuous Drive, Self Timer, Interval Timer, Exposure Bracketing, Focus Bracketing |
| Autofocusing Type | PDAF, CDAF, and LiDAR |
| PDAF Zones | 425 |
| Autofocusing Method | AF-S autofocus single, AF-C autofocus continuous [5], supporting Human, Cat/Dog, and Vehicle detection |
| Touch | Touch AF in MF and Move AF P oint supported |
| Manual Focus | Focus Indicator, Zoom In, and Focus Peaking supported |
| Display | |
| Screen Type | Touch display including click, drag, and pinch/spread to zoom |
| Display Specifications | 3.6-inch wide colour gamut OLED with 100% colour gamut coverage of Display P3, 1,000 nits sustained brightness (typical), 1,400 nits peak brightness (HDR), contrast ratio 2,000,000:1 (typical), D65 display colour temperature, 2.36-million-dot |
| Tilting Angle | Waist-level shooting (90° upward tilting), downward tilting shooting (max tilt angle of 42.7°) |
| Histogram Feedback | Supported in Live View and Browse modes |
| HDR Highlight Preview | Supported highlight preview for JPG and HEIF images with HDR enabled |
| Top Display | |
| Display Specifications | 1.08-inch TFT 18-bit full colour, 158,400-dot |
| Electronic Viewfinder (EVF) | |
| Display Specifications | Micro-OLED s creen, 5.76-million-dot |
| Viewing Area | 100% |
| Magnification | Approx. 1.00x with 65mm medium format l ens at infinity, -1m-1 |
| Power Supply | |
| Battery Type | Rechargeable Li-ion battery (7.27V DC/3400mAh) |
| Charging Method | Connect the USB-C port on the camera to an external power supply |
| Charging Time | Approximately two hours to fully charge the battery using the official 30W USB-C charger and USB-C to USB-C cable |
| Charging Temperature | 5° to 40° C (41° to 104° F) |
| Endurance | Measured according to CIPA standards, battery life i s 327 shots. When preview time is set to Hold and HDR function is off, battery life is 466 shots. [6] |
| Software | |
| Phocus Mobile 2 | Basic operating requirements: Compatible with iPad or iPhone models with more than 3GB of RAM running iOS 16.2 or later. HDR function r equirements: For optimal HDR effect, it is recommended to use iPhone 13 Pro or later models (6GB of RAM or more), iPad Pro 11-in. (M4), iPad Pro 12.9-in. (5th generation or later), and iPad Pro 13-in. (M4), and update to iOS 18 or later, with low power mode off. Low power mode, high temperature environments and high screen brightness will a ffect HDR effects. |
| Phocus for Mac/PC | Basic operating requirements: Compatible with devices with 8GB RAM or more running macOS 12.0 or later, or Windows 10 64-bit or later. HDR function requirements: For optimal HDR effects, it is recommended to use a MacBook Pro equipped with a Liquid Retina XDR display and updated to macOS 12.0 or later. Phocus for PC does not support HDR function currently. |
| Stabilisation | |
| Stabilisation | 5-axis, 10-stop in-body stabilisation [7] |
| Flash | |
| Flash Sync Speed | Flash can be used at all shutter speeds. Mechanical shutter only |
| Flash Control | ISO range from 50 to 25600; Output adjustable from -3 to +3 EV |
| Flash Compatibility | In TTL-mode, the following Flash products can be used: Nikon Flash: SB-300, SB-500, SB-700, SB-5000 Profoto Flash: A10, A1, air remotes: Connect Pro, Connect, Air Remote TTL |
[1] When the camera is in a high temperature environment, the internal temperature of the camera may exceed 45° C due to the heat generated on its own during operation. This will trigger the overheating alarm and automatic shutdown.
[2] HDR function should be enabled in the camera settings menu. HDR is not supported in the following situations: shooting mode set to Focus Bracketing, Continuous, or Exposure Bracketing; Exposure mode set to Manual (M); when connected to a Nikon-compatible flash; image format set to "RAW" only.
HDR HEIF images only support HDR display on X2D II 100C or in Phocus Mobile 2 or Phocus for Mac. To view HDR JPG images, it is recommended to use the latest versions of applications such as Phocus Mobile 2, Phocus for Mac, iPad/iPhone Photos app (iOS 18 or later), MacBook Pro Preview app (macOS 15.0 or later), Google Chrome, Adobe Lightroom, and Adobe Camera Raw. Device requirements are the same as the requirements for using HDR function in Phocus Mobile 2 and Phocus. Some social media apps, such as Instagram and rednote, can display HDR effect on compatible devices. However, the display effect may vary depending on the software and hardware of the device and the compatibility change of the app. Please refer to the actual situation.
[3] The fastest shutter speed varies depending on the lens in use. Refer to the datasheet of the corresponding lens.
[4] Smart Metering is supported only when HDR is enabled. When HDR is enabled, the metering mode will be set to Smart Metering automatically and cannot be changed to other modes.
[5] AF-C is available only when the electronic shutter is off. AF-C is supported only when using the XCD 2,8-4/35-100E, XCD 2,5/38V, XCD 2,5/55V, XCD 2,5/25V, XCD 2,5/90V, XCD 4/28P, and XCD 3,4/75P lenses. Update the lens firmware to the latest firmware.
[6] Measured with the XCD 4/28P lens. Battery life varies when used with different lenses.
[7] 10-stop stabilisation at the image centre and 8-stop at the edges. Measured by Hasselblad with the XCD 3,5/120 Macro lens using CIPA standards.
Beitrage Teilen